Confirm which image is missing

If your own local preview is black, focus on permission, device selection, camera availability, and lighting. If you can see yourself but not the other person, your camera is already producing a usable image; assignment, connection, or incoming remote media is the more likely stage.

This distinction prevents repeated permission changes from disrupting a camera that already works.

Check permission without clearing everything

Open the site controls beside the address bar and confirm Camera is allowed for nanachat. If it was denied, change only this site’s permission, then reload after any active attempt has ended.

Avoid clearing all browser data as a first step. It can remove unrelated sessions without fixing a busy or misselected device.

Release and select the camera

Close meeting apps, camera utilities, and other browser tabs that may be holding the device. Reconnect external cameras, then select the intended camera if the browser offers more than one.

A virtual camera or continuity-camera option can appear valid while providing no image. Choose the physical device deliberately.

  • →Close other camera users.
  • →Reconnect external hardware.
  • →Check the operating-system privacy setting.
  • →Select the intended input in the browser.

Test the simple physical causes

Remove a lens cover, increase room light, and confirm that the camera indicator turns on. A very dark room can look like a failed feed even when capture is active.

If the operating system’s own camera app is also black, resolve the device or system issue before returning to the browser.