Verify the selected input

Headsets, laptop microphones, displays, webcams, and virtual devices can all appear in the input list. Choose the device you intend to use instead of relying on a stale default.

Disconnect and reconnect a headset if its name appears but the level meter does not move.

Check both browser and system permission

Allow Microphone for nanachat in site controls, then confirm that the browser itself is allowed to use the microphone in operating-system privacy settings.

If either layer blocks access, changing the other layer alone will not restore capture.

Look for physical mute and low input

Many headsets have an inline mute, flip-to-mute boom, or hardware button. Confirm it is open and watch the operating-system input meter while speaking normally.

Increase input level only enough to produce clear response. Excess gain can create distortion and background noise.

Separate your microphone from incoming sound

If others cannot hear you, diagnose local capture. If you cannot hear them, check speaker output, tab mute, device volume, and whether remote media has actually arrived.

Audio problems on one direction do not prove both sides are broken.